Armeg S20.0X600 | QFDS 20mm x 600mm SDS Plus Hammer Drill Bit
Armeg S12.0X250 | QFDS 12x250mm SDS+ Hammer Drill Bit

£5.00 ex VAT

£6.00 inc VAT

Armeg S05.5X160 | QFDS 5.5x160mm SDS+ Hammer Drill Bit

£1.75 ex VAT

£2.10 inc VAT

Armeg S20.0X600 | QFDS 20mm x 600mm SDS Plus Hammer Drill Bit

Part Number/SKU: S20.0X600Category:

£21.28 ex VAT

£25.54 inc VAT

This item is currently out of stock.

Armeg S20.0X600 | QFDS 20mm x 600mm SDS Plus Hammer Drill Bit

£21.28 ex VAT

£25.54 inc VAT

  • The Armeg S20.0X600 SDS Plus Hammer Drill Bit is a time and cost-effective professional standard solution for multiple-hole drilling in masonry materials.
  • It is ideal when drilling holes for, fixings and anchors, through holes for cables and wires, pilot holes for coring, and property maintenance.
  • It is also ideal for cordless drills with increased numbers of holes per batter charge.
  • Its hammer-grade tungsten carbide tip technology increases penetration and the efficiency of a cut, whilst providing an extended life in even the hardest masonry materials.
  • In addition, the drill bit can withstand great pressures and produce a great number of drilled holes as it has a copper braze heated to 1100 degrees using a furnace brazing process, ultimately giving the optimum bond between body and tip.
  • It is secured with tip insertion using purpose-made machines operating to pre-set specifications and tolerances which ensure a consistently accurate and perfectly centralised tip for rounder holes.
  • Maximum spoil removal is enabled by the proven flute geometries, with the combination of the flute and tip geometry also helping to produce more accurate and rounder holes.
  • It can be used in a variety of areas such as heavy-duty concrete, general concrete, hard bricks, soft bricks, lightweight blocks, natural stone, constructional granite, and limestone.
  • To fully utilise the drill bits’ potential, ensure the drill bit shank is always properly lubricated with a machine manufactures recommended grease.
  • The product is designed to be used in power tools hence the recommended speed is largely dependent on the power tool being used.
  • Generally, it is recommended that the larger the Diameter of the drill bit being used, the slower the speed.
  • Whilst operating, it is highly recommended that you wear hand, eye, and ear protection, as well as a face mask.
  • Dimensions of Diameter 20mm x Overall Length 600mm x Working Length 550mm.

    • Additional information

    Product

    Drill Bit
    Use

    Masonry
    Shank Type

    SDS Plus
    Diameter

    20 mm
    Length Min Max

    600 mm
    Cutting Depth

    550 mm
    no downloads/datasheets currently available.

    Related products